l Two possible modes of operation: manual , in which the operator must press the buttons, or automatic , in which a photocell controls the process automatically 10 different work cycles programmable setting various parameters such as revolutions lower and upper photocell reading delay, number of cycles in sequence, Programming up to a maximum of 9 cycles in sequence Adjusting photocell reading delay compared summit pallet Phase stopping: the machine always stops in the same position Adjusting velicità rotation turntable by inverter Film tension adjustment through the clutch / brake mechanical Automatic check-reel cart with photocell Command of ascent and descent of the coil controlled by a simple joy-stick Movement cart-reel through chain closed loop It is not necessary to bury the car: in fact using the loading chute can be loaded on the pallet machine with a standard pallet truck To facilitate the movement of the machine are provided inside the base, revenue for the forks of the forklift Emergency stop button TECHNICAL FEATURES ECOSPIR ELC / SX Supply voltage 380 V - 3 Ph - 50 Hz + N Installed power 1 KW Overall dimensions DIA x L x H 1500 x 2250 x 2350 mm Ground clearance 80 mm Weight 370 kg Size table 1500 mm Maximum size bed 1200 x 1200 mm Maximum height of pallet 2000 mm Maximum weight bench 1700 kg Diameter coil 300 mm Height coil 500 mm Compressed air No Spin speed Up to 10 cycles / min Captcha image
به روز شده: سه شنبه, 27 بهمن 1394 |